How to commission china Flat Conveyor Belts
This article is based on many years of field practice, from the user's point of view, using mechanical principles to analyze and explain the causes and treatment methods of such failures in China Flat Conveyor Belts.
The axis of the head drive pulley or tail deflector pulley is not perpendicular to the centerline of the conveyor, causing the conveyor belt to run off at the head pulley or tail deflector pulley. When the roller is deflected, the tightness of the conveyor belt on both sides of the roller is inconsistent, and the traction force Fq received along the width direction is also inconsistent, showing an increasing or decreasing trend, which will add a moving force Fy in the decreasing direction to the conveyor belt. , causing the conveyor belt to deviate to the loose side, which is the so-called "running loose but not tight".
The adjustment method is: for the head roller, if the conveyor belt deviates to the right side of the roller, the bearing seat on the right side should move forward, and the conveyor belt deviates to the left side of the roller, then the bearing seat on the left side should move forward Correspondingly, the left bearing seat or the right bearing seat can be moved backward. The adjustment method of the tail drum is just opposite to that of the head drum. After repeated adjustments until the conveyor belt is adjusted to an ideal position. It is best to install its position accurately before adjusting the driving or reversing roller.
Our company specializes in the production of China Flat Conveyor Belts, if necessary, please contact us.
Preceding Page：
Next Page：
Related News
TIGER(FUJIAN) INDUSTRIAL BELT CO.,LTD
0086(0595)83112333
© Copyright 2024. TIGER(FUJIAN) INDUSTRIAL BELT CO.,LTD.