Rubber Coated Conveyor Belt Joint Method
All conveyor belts must be connected in a loop before use, so the quality of the conveyor belt joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly.
Mechanical joint
Generally, it refers to the use of belt buckle joints. This joint method is convenient, convenient and economical, but the joints are inefficient and easy to damage, which has a certain impact on the service life of conveyor belt products. In the joints of PVC and PVG whole core flame retardant and antistatic conveyor belts, this joint method is generally used for products below grade 8 belts. Connecting with snaps is equivalent to 28%-45% of the strength of the conveyor belt itself.
cold bonding head
That is, a cold-bond adhesive is used for joints. This joint method is more efficient and economical than mechanical joints, and should be able to achieve better joint effects. However, from a practical point of view, due to the difficulty in mastering the process conditions, and the quality of the adhesive has a great influence on the joints. So not very stable. Bonding with cold adhesive is equivalent to 40%-55% of the strength of the conveyor belt itself.
Hot Vulcanized Joints
Practice has proved that it is the most ideal joint method, which can ensure high joint efficiency, and is also very stable. The joint life is also very long and easy to master. However, there are disadvantages such as troublesome process, high cost, and long joint time.
Preceding Page：
Next Page：
Related News
TIGER(FUJIAN) INDUSTRIAL BELT CO.,LTD
0086(0595)83112333
© Copyright 2024. TIGER(FUJIAN) INDUSTRIAL BELT CO.,LTD.