

Español





Search for

Confirm

Cancel

language 

中国

韩国





Home
Products 
Industries 
- Automotive and Tire
- Textile
- Printing
- Package
- Food
- Logistic
- Stone
- Wood
- Sport
- More industries
Processing 
Contact Us

Homepage

Belting Knowledges

How to install the drive belt correctly

Time of issue:2022-12-12 15:27

(Summary description)To clean the belt and pulley, wipe it with a cloth dipped in some non-volatile liquid, do not soak in detergent or use detergent to wipe the belt. Saddle straps must be dry before installation.

Best transmission belt





How to install the drive belt correctly

Categories:Belting Knowledges
Author:
Origin:
Time of issue:2022-12-12 15:27
Views:0

Information

1. To clean the belt and pulley, wipe it with a cloth dipped in some non-volatile liquid, do not soak in detergent or use detergent to wipe the belt. Saddle straps must be dry before installation.
2. When it is not suitable for replacement, the conveyor belt can be opened first, and the bending radius should be large enough to prevent the belt from being damaged. Folding and placing heavy objects should be prohibited.

customized transmission belt

3. When removing and installing the conveyor belt, the center distance between the two pulleys should be adjusted to avoid damage to the belt or equipment by hard prying. After the belt is covered, the center distance between the two wheels should be adjusted to the correct position. The belt should have proper tightness. At this time, one end of the conveyor belt can be fixed on the conveyor frame with a clamp, and the other end can be tightened with a pulley until the conveyor belt does not sag significantly on the return idler.
4. If the old belt is replaced, the new belt can be connected with the old one, and the unloading and installation of the new conveyor belt are carried out at the same time. If it is a set of conveyor belts, if they are damaged, they need to be replaced in groups. Remember not to mix and match old and new.
5. For the conveyor running horizontally, it can be cut at any point, and it is required to select the cutting point in the inclined direction of the conveyor to prevent loss of control due to weight slide.
6. The belt must be correctly installed in the wheel groove, and the outer edge of the belt should be flush with the wheel rim. The axes of the two pulleys should be kept parallel, and the planes of symmetry of the two pulleys should coincide.

Keyword:

Scan the QR code to read on your phone

Previous: How to prevent the deviation and instability of the industrial flat transmission belt

Next: Characteristics of rubber V-belts in washing machines

Previous: How to prevent the deviation and instability of the industrial flat transmission belt

Next: Characteristics of rubber V-belts in washing machines

Username used for comment:

客户留言

Description:

* Message contents：

Name：

* E-mail：

Mobile phone：

GOLDEN

In short, integrity, transparency and mutual trust is Tiger Industrial Belt’s foundation of close cooperation with customers. Tiger Industrial Belt’s aspiration is being a reliable partner whose mission is total customer satisfaction.